Continuing with our mission to make vehicle diagnostics easier and faster…the new CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test leads supplied you can connect your PicoScope lab scope to the CAN Test Box to monitor signals such as the CAN High and Low. More.....
We have just posted a few new Automotive Tutorials and Case studies Here is the latest: Honda Rattle
Our most popular kit gives you the ability to measure and record up to four signals simultaneously. It comes complete with a variety of accessories including leads, probes, clips and current clamps to allow virtually all the components on modern vehicles to be tested.
PicoScope 4425
1
Channels
4
Accuracy
±1%
Memory
250 M samples
Maximum sampling rate
400 MS/s
20 A/60 A AC/DC current clamp
1
200 A/2000 A AC/DC current clamp
1
Premium test leads: 3M BNC to 4mm permanent ground (blue, red, green, yellow)
PP923 - *NEW*
