PicoScope Storage Solutions

FOAM TRAY OPTIONS

US Prices 
CDN Prices

Privacy and Security Policy

Pico Kits with foam

Most Pico Automotive kits are supplied with 3 different storage optons
Kit in Case
Kit In Foam
Kit in Case and Foam

Kit in Case is the most common kit sourced out there. These kits all have either the Pico 2 Channel 4224A Oscilloscope or the 4 Channel 4425A Oscilloscope. Each kit type has different accessories allowing one to purchase the most appropriate kit for your main area of work.

Diesel Kit is for people working with primarily Diesel Vehicles, no secondary ignition or Coil on plug pick up as Diesel engines do not require these.
EV kit has instruments as accessories that would be beneficial when working on EV Vehicles etc.

With regards to the packaging as an example, the PQ194 is the Pico Master Kit in Case [All the accessories are packages inside a Hard Plastic Carrying case].
The PQ237 is the very same kit as the PQ194 however the kit comes with many foam trays that allows you to store all the accessories in a Stationary or Mobile Tool Chest, where all the bits and pieces are well organized. [NO Plastic case is provided in this kit]
Finally, the PQ282 is once again the same kit as the PQ194 [same scope and accessories] with both the carrying case and the foam trays.

This is repeated accross most of the kits and can be seen on our Price list located at either of these two price lists:

US Price list here: https://www.interworldna.com/PriceLists/pricelist_main.php?catName=Pico Automotive&ct=2

Candian price list here: http://https://www.interworldna.com/PriceLists/pricelist_main.php?catName=Pico Automotive&ct=1

These Foam trays listed below have been designed to be compatible with many toolbox providers.

The Pico foam trays come in two sizes: 185 mm(W) x 390 mm(D), and 370 mm(W) x 390 mm(D) depending on function. Both sizes include a removable 20 mm strip so they will fit in 370 mm deep trays. Available either pre-packed with various kit options, or empty if you have your kit already.

In addition to these foam trays we also have our trolley boom available for arranging your diagnostic station.
                                     
 

Product Foam Options for New 4425A PicoBNC Scopes and Accessories
	Product	Price
	PicoScope boom kit PP985 The PicoScope Boom Kit allows you to store your PicoScope and all your commonly used leads conveniently while allowing for quick access. The Boom has slots for three current clamps and up to nine cables.
	Automotive Case PA084 The Automotive Carry Case, as supplied with our top-of-the-range automotive diagnostic kits. This case is suitable for PicoScope 4225 and 4425 scopes. If you require a carry case for an older product such as the PicoScope 4223 or 4423, please contact us.
	Foam tool tray for Automotive scope and accessories PP983 This foam tool tray has space for your: Automotive PicoScope Back-pinning probe set Probes 2 x 10:1 attenuators JCASE fuse extension COP and signal probe
	Foam tray for WPS500X and accessories PA107 Foam tray for your WPS500X and all accessories in the PP939 kit, plus 3 pressure taps, 3 optional compression adaptors and a spare compression hose.
	Foam tray for 2 current clamps PA108 Foam tool tray comprising of one space for the TA018 20 / 60 A DC (low amps) current clamp, and one universal space for the TA167, TA189 or TA234.
	Foam tray for breakout leads and fuse extensions PA109 Foam tray for your PP943 breakout lead kit, and space for both theTA034 and TA035 fuse extension leads.
	Foam tray for HT Extension leads PA114 Foam tray for your PP400 HT extension lead set, and two additional spaces for breakout leads.
	Foam tray for TA069 CAN test box PA111 Foam tray for your TA069 CAN test box.